Hardware

Klean Strip Paint thinner effectively thins oil-based paint, stain and varnish. It can also be used to clean brushes and equipment immediately after use.

Rust-proof. 1/4 in shackle diameter with 2-1/2 in vertical shackle clearance. Nickel finish. Two brass keys included. M1 keyway. Includes two nickel plated brass keys per padlock. Twin pack.

Masonry accessory used to tie a brick veneer to the exterior of the house. Two holes provide for nailing on one end, other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8 in x 7/8 in. Boxed.

Liquid Nails LNP902-28oz Subfloor and Deck Construction Adhesive permanently bonds wet, frozen and treated lumber, bridging gaps up to 3/8". This extreme temperature formula is also ideal for bonding most common building materials and is certified to the

GRK Fasteners #8 x 2-1/2 in. RT Trim Screws (100 per Pack) are Climate coated for corrosion resistance and recommended for composite decking applications. GRK's W-Cut thread design and Zip-Tip help prevent most material from splitting. No pre-drilling is

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut

GRK Fasteners #8 x 1-1/2 in. Finish Trim Screws are an excellent choice for most fine carpentry applications. They are also ideal for the installation of window extension jambs and molding. GRK FIN/Trim Screws offer Climatek coating for corrosion protecti

"YTX" #8 x 2-1/2" with .32" Diameter Torx Drive Head. Use T20 Torx/Star Drive Bit to Install These Wood Screws. Our Gold Star Torx/Star Drive Screws Are An Excellent Fastener for Multipurpose Applications in Hard and Soft Woods, Chipboard, and Other Tough

GRK Fasteners Star Drive Bit, Drive Size: T25, Green, 2in. L, Package Type: Pack, Suitable for: #10 and 1/4in. Rugged Structural Screw

GRK offers a complete line of fasteners for many different applications and a size range which cannot be matched by the combined catalogs of any two competitors. All of GRK's products are unique, featuring at least one patent. GRK always aims to improve i

Easy to install lag alternative. Zero stripping recessed star drive. Cee thread for a clean finished look. W-Cut for low torque, smoother drive. ZIP-TIP for no pre-drilling, faster penetration. Washer head provides immense holding power. Cutting pockets p

GRK's FIN/TRIM head screws are an excellent choice for most trim carpentry applications. They have the smallest screw head available with lengths from 1-1/4-inch to 5-inch. Most material splitting is prevented by the Trim head screw's small head and W-cut