Plumbing

LASCO Pipe Elbow, Nominal Size: 1-1/2 in, Slip Connection, Angle: 45 deg, 330 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White

Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks, no solvent weld necessary. Internal, high-quality, self-lubricating EDPM O-ring for long life and smooth movement. 150 psi pressure-rated in all positions. Complies with all appl

NIBCO Pipe Elbow, Nominal Size: 1/2 in, Angle: 45 deg, Operating Temperature: 180 deg F, Schedule Rating: 40, CPVC

Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks, no solvent weld necessary. Internal, high-quality, self-lubricating EDPM O-ring for long life and smooth movement. 150 psi pressure-rated in all positions. Complies with all appl

LASCO Pipe Elbow, Nominal Size: 1/2 in, Slip Connection, Angle: 90 deg, Operating Temperature: 73 to 140 deg F, Schedule Rating: SCH 40, PVC, White

SharkBite® elbows allow the user to connect any combination of copper, PEX CPVC or PE-RT pipe together to form a 90 deg connection. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to be

LASCO Reducer Coupling, Nominal Size: 3/4 x 1/2 in, Slip Connection, Schedule Rating: SCH 40, PVC, White

This union solvent welds directly to CPVC pipe and provides a method for future disassembly of piping without cutting.

EPC 31290 Pipe Reducing Elbow, 3/4 x 1/2 in Nominal, C x C, Sweat Connection, 90 deg Angle, Copper

This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not

The ProSource pipe elbow connects cast iron, copper, plastic or steel pipe and it's extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems

The ProSource pipe hub donuts are for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems.