Tools

1 in. #10 Torx Drive Bits (2-Pack)

1 in. #1 Phillips Drive Bits (2-Pack)

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced

High impact twist knot wire brush. Used in surface preparation prior to welding and for removing weld scale, spatter and heavy corrosion. Used for heavy-duty cleaning applications. arbor: 1/2 to 5/8 in, wire size: 0.02 in (0.50 mm). maximum rpm 9000.

Ideal for fast, heavy-duty cleaning of large surfaces, removing weld scale, rust, burrs and more. Designed for use in high speed air and electric tools, both portable and stationary machines. Arbor: 5/8-11, wire size, 0.02 in (0.5 mm). Maximum rpm: 8500.

Ideal for fast, heavy-duty cleaning of large surfaces, removing weld scale, rust, burrs and more. Designed for use in high speed air and electric tools, both portable and stationary machines. Arbor: 5/8-11, Wire size, 0.020 in (0.50 mm). Maximum rpm: 12,5

Maximize your band saw performance and make straight, accurate cuts in a variety of materials with the Milwaukee 18 TPI standard or deep-cut portable band saw blade (3/PK). Get exceptional durability and accuracy for your portable band saw that takes a 44

Silicone carbide grain for material removal. Ideal for cutting masonry. Ideal for use with angle grinder. Provides the necessary performance and durability to complete your masonry project.

Recommended applications: wood and nails, fiber cement, wood, wood composites, PVC and rubber. Extra thick .062" blade for extreme demolition cuts. Delivers the lowest amount of deflection while cutting wide materials. Optimal for rough-in cutting a wide

IMPERIAL BLADES Standard Reciprocating Blade, Bi-Metal, Cutting Edge Material: Bi-Metal, Teeth per Inch: 18 TPI, 9 in L, 0.035 in Thick, Applicable Materials: Copper Pipe, Fiber Cement, Metal, Thin Metal

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.

Rectangular in cross section and taper slightly towards point in width, double cut on sides, single cut on edges. Used by machinists, machinery builders, ship and engine builders also by repairman and others who require rapid removal of metal.